【DGS60-A1A01024施克SICK编码器】价格_批发价 - 中国继电器（新）网悠牛网

Model Name DGS60-A1A01024
Part No. 1032280

Mechanical data
Shaft diameter: 6 mm x 10 mm
Moment of inertia of the rotor: 13 gcm²
Max. angular acceleration: 5 x 10^5 rad/s²
Start up torque with shaft seal: 1.5 Ncm (20 °C)
Start up torque without shaft seal: 0.2 Ncm (20 °C)
Mechanical interface: Solid shaft, Servo flange
Mass: 0.3 kg (for an encoder with connector outlet)
Operating torque with shaft seal: 1 Ncm (20 °C)
Operating torque without shaft seal: 0.1 Ncm (20 °C)
Permissible shaft loading radial/axial: 20 N, 10 N
Maximum operating speed without shaft seal: 10,000 1/min 1)
Maximum operating speed with shaft seal: 6,000 1/min
Bearing lifetime: 3.6 x 10^10 revolutions
1) At speeds > 600 rpm the shaft seal musst be removed

Electrical data
Connection type: Connector, M23, 12-pin, radial
Reference signal, number: 1
Reference signal, position: 90 °, electronically, gated with A and B
Electrical interface: 4 V ... 6 V, TTL/RS422
Operating power consumption (no load): 120 mA
Supply voltage: 4 V ... 6 V
Load current: 20 mA
Maximum output frequency: 600 kHz


Ambient data
Resistance to shocks: 30 g, 11 ms (EN 60068-2-27)
Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
EMC: EN 61000-6-2, EN 61000-6-3
Protection class housing side with connector outlet: IP 65 1)
Protection class housing side with cable outlet: IP 67
Protection class shaft side: IP 65
Protection class standard: IEC 60529
Air humidity: 90 % 2)
Working temperature range: -20 °C ... 85 °C
Storage temperature range: -30 °C ... 85 °C
1) With mating connector fitted 2) Condensation of the optical scanning not permitted

System data
Measuring step: 90 °, electronically/number of lines
Measuring step deviation: 0.044 °
Number of lines per revolution: 1,024
Error limits: 0.098 °