产品介绍The is a dual 8-bit monolithic sampling analog-todigital converter with on-chip track-and-hold circuits and is optimized for low cost, low power, small size and ease of use. The product operates at a 100 MSPS conversion rate with outstanding dynamic performance over its full operating range. Each channel can be operated independently. The ADC requires only a single 3.0 V (2.7 V to 3.6 V) power supply and an encode clock for full-performance operation. No external reference or driver components are required for many applications. The digital outputs are TTL/CMOS compatible and a separate output power supply pin supports interfacing with 3.3 V or 2.5 V logic.The encode input is TTL/CMOS compatible and the 8-bit digital outputs can be operated from +3.0 V (2.5 V to 3.6 V) supplies. User-selectable options are available to offer a combination of standby modes, digital data formats and digital data timing schemes. In standby mode, the digital outputs are driven to a high impedance state. 产品属性■ Dual 8-Bit, 40 MSPS, 80 MSPS, and 100 MSPS ADC■ Low Power: 90 mW at 100 MSPS per Channel■ On-Chip Reference and Track/Holds■ 475 MHz Analog Bandwidth Each Channel■ SNR = 47 dB @ 41 MHz■ 1 V p-p Analog Input Range Each Channel■ Single +3.0 V Supply Operation (2.7 V–3.6 V)■ Standby Mode for Single Channel Operation■ Twos Complement or Offset Binary Output Mode■ Output Data Alignment Mode■ Pin compatible 10bit upgrade其他说明其他的描述,请参阅产品规格其他说明，产品图片仅供参考，请以实物为准；；（Other note: other description, please refer to the product specifications, product pictures are for reference only, please in kind prevail;）交易说明请直接联系咨询，谢谢；Please directly contact us, thank you