一、产品简介
气动升降杆，气动升降器，气动升降机具有负载大、噪音小、升降快、抗震性小、自落缓冲性能强、平稳等优点。本公司的气动升降杆，气动升降器，气动升降机，气动升降平台，气动升降支架产品采用高强度铝合金制造，重量轻，能够满足不同领域、不同场合对高度和载重的需求，在各种自然灾害、突发事件现场夜间抢险、抢救中发挥着重要作用。此外，本公司产品还广泛应用于高尔夫、大型足球场夜间照明等。
二、使用说明
1.将升降杆从布袋内取出，垂直置于地面上；
To take the mast from the
hop-pocket, stand vertically on the ground
2.打开升降杆三脚架的三个撑腿使之平行于地面；
To open the three legs of
tripod, run them parallel with the ground
3.转动撑杆调节套使撑杆最短,这样锁圈处于自由转动状态,转动锁圈并锁定； To turn the adjusting sleeves of
tripod body, make the tripod body into minimum length. The locking collar is in
free revolving, turn the locking collar and locks it
4.转动调节撑杆调节套使升降杆垂直于地面；
To turn the adjusting sleeve,
make the mast vertically on the ground.
5.在一个纤绳挂环上挂三个纤绳,接通气泵；
To install three cordelles into one cordelle hanged ring, connect with the pump
6.在升降杆完全升起后,将纤绳下端栓在地面固定物上,以保持升降杆稳定； To fix the cordelles on the
ground so as to keep the mast completely extend
7.将进气管折起后可以撤除气泵,升降杆在2kg气压状态下可保持24小时以上；
To take away the pump after
tucking up the air pipe. The mast can keep standing over 24 hours under 2kgs
air pressure
8.用后将气动升降器收藏于布袋内。
To collect the mast into the
hop-pocket after working
