【TTV气动高性能偏心蝶阀】价格_批发价

-体积小，重量轻

-安装,拆卸及操作简易

-方便的手动操作,电动,气动和液压自动化操作

-可自动清洁,无需维护

-完全密封,最大程度保压

-单件阀杆,不用插销.

The separation between the flanges should allow free access to the valve with the disk half closed,so the rim is protected and the interference of the elastic rings is reduced during the installation,and the initial value when opening.

法兰之间的空隙应当允许阀板半关闭状态的阀门进入,这样在安装过程中及初次打开阀门的时候阀座边缘将被保护着并且密封圈内侧将缩小.

After aligning the valve with the tube flanges,and before tightening the bolts,the disk should be turned until it is completely open.lf it were closed it would twist the ring,so it would expand round the edge of the disk,which woukd create an excessively high torque in the initial opening:it coukd tear or be twisted out of shape permanently.

在调整好阀门与管道法兰的位置后及旋紧螺栓之前,阀板应置于完全打开位置.如果阀板处于关闭状态,密封圈可能被扭曲,挤压膨胀并包住阀板边缘,在初次打开造成极大的力矩.阀座可能因此被撕扯.扭曲造成永久性的损害.

Las bridas insuficientemente separadas pueden deteriorar el anillo elastico.if the flanges are not sufficiently separated they could damage the elsdtic ring.

在安装蹀阀时,如果法兰未能给予蹀阀充分的空间将会损坏密封圈.

双偏心阀门的金属密封在高温环境下比橡胶封圈密闭性更好.

工作压力：≤25BAR

法兰连接：DIN2501-PN10/16/25-ANSI 150 LBS

设计标准：EN593

GB/T 12238

公称直径：DN65-DN300

应用范围：石油、化工、食品、医药、能源等

适用温度：-79℃至180℃(可因材料不同而变化)

结构长度：GB/T 12221 J3系列

ISO 5752 Short，series 16

BS5155 Wafer Short∕Medium