软缆保持力试验机：CR-1 产品概述： 本装置符合GB2099.1-2008图20、IEC60884图20、VDE0620，适用于对插头导线与电器附件是否牢固进行检验。 本装置用于检验电源插头线的导线压紧能力，试法为将插头朝上，插头线穿入横杠，插头线下端吊挂规定之砝码，然后以每秒 1 次的速度上下摆动100 次，再检测插头是否受损及电线与插头之间不得脱落。 电源 Power AC220V / 50Hz 负载砝码：10N、60N各1个，20N两个； 施力频率：60次/分钟。 Apparatus for testing cord retention CR-1The HT apparatus for testing cord retention is for check the effectiveness of the retention of the cable of the cord anchorage .The flexible cable is then subjected 100 times to a pull of – 50 N if the rated current is 2,5 A, – 60 N if the rated current is above 2,5 A, but not more than16 Aand the rated voltage is up to and including 250 V, – 80 N if the rated current is above 2,5 A, but not more than16 Aand the rated voltage is above 250 V, – 100 N if the rated current greater than16 A. Power Supply: 220V 50Hz or 115V 60HzNumber of Test: 1~9999Rate of Testing : 60 times/minMass: 10N*1,60N*1,20N*2Conforms to standard: IEC60884Figure 20,VDE0620