概述：本机是采用高强度耐磨合金辊相对旋转产生的高挤压力来破碎物料。物料进入破碎腔后，受到磨辊的相对旋转的挤压力作用，在挤扎和齿磨下，将物料破碎成理想颗粒排除。用于破碎中硬度物料及其硬度相当的固体物料的破碎如：（HRC小于8）水泥熟料、石灰石、煤、混凝土等。广泛用于电力、矿山、建材、钢铁、陶瓷等行业。 破碎机性能特点Characteristics： 辊面采用进口辊压机的錐焊技术，一次可生产20万吨以上。Roller surface adopt imported roller press cone welding technology, once can produce 200,000 tons of above. 主机与动力采用联轴器链接，避免了因皮带打滑造成的物料粒度无法控制及皮带更换频繁现象。Host and dynamic using coupling links, avoids belt skid caused material particle size cannot control and belt replacement frequent phenomena. 布料器采用无动力结构，均匀给料，大大提高破碎效率。Cloth by without power feeder structure, feeding, greatly increase crushing efficiency. 遇有过硬和不可破碎物时，可以通过弹簧或液压装置的作用自动退让，保护机器不受损害。In case of perfect and do not break things, can pass the role of hydraulic equipment spring or automatic compromise, protect the machine is not compromised. 两辊之间的间隙可调，从而控制破碎粒度改变生产能力。Two roller clearances between adjustable, so as to control crushing grain size change production capacity. 减速机采用硬齿面减速机，具有抗重载、性能可靠、寿命长等优点。Deceleration machine adopts hard-toothed surface reducer, have fight overloaded, reliable performance, long life, etc. 轴承密封采用二层密封圈结构，可长时间无需加注润滑油。Bearing seal USES second sealing structure, long time no fill lube. www.xinzhouhuanbao.com