【进口卫生级L型隔膜阀】价格_批发价

进口卫生级L型隔膜阀||L型三通隔膜阀|L型卫生级隔膜阀|L型换向隔膜阀|Ra0.2um—密封可靠，无污染

一、进口卫生级L型隔膜阀概述

品牌：德国力特LIT

进口卫生级L型隔膜阀是指阀体有三个通道，成L型结构，可以对三个管路的流体介质进行换向的隔膜阀专用于控制制药、饮用食类介质的各类管路或设备上作启闭及节流用。阀体使用在药液或纯水系统中的环形管路上．通过这种技术方案可以做到无死角的状态下取样或者用水．除此之外，根据工艺的要求，也可进行两种介质的混合．重要的是隔膜阀的密封脊要尽可能地靠近主管道的管路。阀体经高速精加工抛光处理，光洁度达到Ra0.2um，绝对无菌、无孔角、广泛应用于生物、制药、电子等无菌要求很高的系统。

Sanitary L type diaphragm valve refers to the valve body has three channels, a L type structure, can the fluid media on the three line of the reversing diaphragm valve dedicated to control pharmaceutical, potable media of all kinds of piping or equipment for opening and closing the throttle and use. Valve used in liquid or annular pipe water system. Based on the technical scheme can be done without dead state sampling or water. In addition, according to the process requirements, mixing can also be carried out two kinds of media. It is important to pipe sealing ridge diaphragm valves should be as close as possible to the main pipeline. The valve body through high-speed polishing, finish up to Ra0.2um, absolutely sterile, non hole angle, system is widely used in biological, pharmaceutical, electronics and other aseptic demanding.

二、进口卫生级L型隔膜阀产品特征：

1、控制方式有气动和手动维护量极少

2、各种表面抛光无死角阀体材质316L 可任意组合成各种多通阀门,特别适用于PW、WFI的输送于分配、及CIP、SIP系统

3、可安装于任何位置,介质流向对阀门开闭不影响

4、L型阀门安装在药液或纯水系统中的环行管路上,通过这种技术方案可以做到无死角的状态下取样或者用水.提供所有现行的卡接或焊接的工业标准

三、进口卫生级L型隔膜阀技术参数

规格：DN15-DN50

标准：ISO .DIN

适用温度：-40℃-+150℃

工作压力：≤16bar

密封材质：EPDM、PTFE

阀体材质：不锈钢