实心喷嘴的喷雾特性及设计特点先做详细介绍：
喷嘴的喷雾形状为实心锥形，喷嘴内部有独特设计的叶片，该设计使雾化效果非常细密均匀，喷嘴类型分为4类，其中可拆卸帽盖设计的G和GG，适用于小流量喷雾需求，且清洗维护均很方便。整体式设计的H和HH系列，结构紧凑，适合较大流量喷雾需求。
一般应用于：
冷却清洗（COOLING
AND CLEANING)；
物料喷洒(sPRAYING)；
喷涂(Material
Spraying)；
除尘压灰（De-dust
and DE-ASH）；
消防灭火(fIREproof
and fire fire extingguishing)；
H-VV喷嘴过滤器主体是用黄铜或不锈钢制成的，滤网是304不锈钢制作的。这些过滤器适用于所有1/8vv或1/4VV喷嘴。他们为滤出体积太大，难以通过喷嘴的颗粒提供了有效的手段。
射流稳定器装在扇形喷嘴上，用于增加喷射距离和增强冲击力。当喷嘴安装在T型管上，分支管，或者弯管上时，液体拐弯进入喷嘴就会产生涡流，这种涡流能够破坏喷射的均匀 性，射流稳定器把涡流减小到更低程度，并通过把射流集聚为更薄，更稳定 的方式，增加喷射距离，增强冲击力。
H - VV nozzle filter main body is made of brass or stainless steel, the mesh is made of 304 stainless steel.These filters are applicable to all 1/8 vv or 1/4 vv nozzle.They to filter out the volume is too big, difficult to through the nozzle particles provides an effective way.
Jet stabilizer on the fan nozzle, used to increase the jet distance and enhance the impact.When the nozzle is installed on the T tube, pipe branch, or bent pipe, the liquid turned into the nozzle can produce eddy current, the uniformity of the eddy current can damage jet, jet stabilizer to minimize the degree of the eddy current, and through the jet agglomeration is thinner, more stable way, increase the jet distance, enhance the impact.
液压式雾化喷嘴的特性和优点：
液压式雾化喷嘴无需使用压缩空气，利用液压就能形成非常微细的空心锥形雾化喷雾；
分布均匀，压力和流量试用范围非常广；
极其细小的颗粒，形成雾状喷雾效果；
墙上安装型喷嘴可用于外墙，容器和管道；
喷孔嵌体、盘芯及过滤器便于拆卸，以进行检测或清洗。
大多数型号均配备内置的滤网。
The characteristics of hydraulic spray nozzle and advantages:
Without using compressed air hydraulic spray nozzle, a very fine hollow cone can be formed using hydraulic atomized spray;
Pressure and flow uniform distribution, trial range is very wide.
Very small particles to form fog spray effect;
Install on the wall type nozzle can be used for exterior wall, containers and pipes;
Inlay, core plate and the nozzle filter is easy to remove, for testing or cleaning.
Most of the models are equipped with a built-in filter.
