SNCR脱硝喷枪双流体喷枪的一般应用：

喷枪采用快速接头连接方式，拆卸方便；

采用保护碳化硅，具有耐高温，耐磨损等特点，无需另设冷却装置就可确保喷枪长期安全运行；

喷枪体积小，套管外径只有36mm,可直接安装于炉壁上。

喷枪采用保护套管及活动法兰连接。可手动将伸进或者退出炉内；

采用金属保护套管设有风冷接口，确保高温环境下长期使用；

一般应用：

燃煤锅炉半干法喷雾脱硫；

高炉泸顶喷雾降温；

高炉煤气降温冷却；

水泥干法线转窑尾增湿塔烟气增湿降温冷却；

垃圾焚烧冷却塔高温烟气喷雾降温冷却；

有色金属冶炼高温烟气的喷雾降温冷却；

高炉重力除尘器内烟气的干法喷雾降温；

电路炼钢厂烟气的蒸汽冷却；

玻璃、烧结、化工行业高温烟气喷雾降温。

SNCR denitration gun general application of the dual fluid spray gun:

Spray gun using quick joint connection, disassemble;

Adopt protection of silicon carbide, with high temperature resistance, wear resistance and other characteristics, without setting up cooling device can ensure the long-term safe operation of the spray gun;

Only 36 mm gun is small in size, casing diameter, can be directly installed on the furnace wall.

Spray gun used to protect casing flange connection and activities.Manual will be reached or come back;

Use a metal protective casing is equipped with air cooling interface, to ensure the long-term use under high temperature environment;

General application:

Coal fired boiler semi dry spray desulfurization;

The blast furnace filter spray cooling;

Blast furnace gas temperature and cooling;

Cement dry normal turn preheater humidifying tower flue gas humidification and cooling of cooling;

Garbage incineration flue gas spray cooling tower high temperature cooling cooling;

Smelting non-ferrous metal spray cooling high temperature flue gas cooling;

Blast furnace flue gas dry spray cooling in gravity dust collector;

The circuit steel plant flue gas steam cooling;

Glass, sintering, chemical industry, high temperature flue gas spray cooling.

FM雾化喷枪的三种雾化技术的特点

(1)

传统高压雾化方式

：传统高压喷枪的喷涂气压一般为

4.0

巴，涂料是靠压缩空气的

压力完成雾化的。因此，传统喷枪的风帽雾化压力必须要够高才能有足够的能量把涂

料雾化好，可是高的雾化压力会令雾化后的涂料会产生一个较大的流速，当涂料流速

过快地喷射在工件表面时，就会产生一定的反弹形成过喷，大大降低了涂料的传递效

率（即上漆率）

，它的传递效率一般仅为

35

％－

45

％左右，除了产生不必要的污染外

亦浪费涂料。

斐卓Feizhuo气动式伸缩喷枪性能特点

1、  雾化均匀——喷雾全区域的粒径分布均匀，为液体的均匀蒸发和吸收反应提供了非常优越的保证。平均颗粒直径只有60μm，粒径120μm。

2、  运行成本更低——低气水比是此款喷枪的优点，长时间使用更能节省运行成本。

3、  气动伸缩装置——喷枪采用气动伸缩装置，喷枪不运行时可以自动退出炉内，易于喷枪的维护，大大延长了喷枪的使用寿命。

4、  流量范围广——流量范围从3L/h—400L/h,可以满足各种流量需求。

5、  使用寿命长——因喷嘴是在低压环境下工作，水压气压都不超过0.6Mpa，所以对喷嘴磨损很小，而喷枪亦可带保护套管，喷嘴置于保护套管内，能够更好保护喷嘴，从而大大延长使用寿命。

       角度：20°

      流量：0.05-6.67L/min

      材质：304、310不锈钢，哈氏合金

      喷雾形状：空心锥形、实心锥形、扇形产品介绍

1, uniform atomization, spray the whole area of uniform particle size distribution, provides the uniform liquid evaporation and absorption reaction is very superior.The average particle diameter of only 60 mu m, maximum particle size of 120 microns.

2, lower operation cost, low gas water ratio is the advantage of this spray gun, use for a long time can save running cost more.

3, pneumatic telescopic device, pneumatic telescopic device for the gun, spray gun not runtime can automatically come back inside, easy to spray gun maintenance, greatly extend the service life of the gun.

4, wide flow range - flow range from 3 l/h, 400 l/h, can satisfy all kinds of traffic demand.

5, long service life, because of the nozzle is working under low pressure environment, hydrostatic pressure no more than 0.6 Mpa, so wear of nozzle is small, and the spray gun can protect casing, nozzle inserted in case, can better protect the nozzle, thus greatly