氨水脱硝喷枪的特点：

1、产生平均粒径为70微米 “微雾”的二流体扇形喷嘴。

2、流量调整范围较大，且喷雾角度变动小。

3、喷雾形状全区域内的粒径均匀。

4、流量分布均等，适合于多数喷嘴排列使用，喷射距离远，穿透力强。

5、异物通过径大，不易阻塞。

6、结构简单，便于维护

7、可移动设计，安装拆卸更加方便快捷，大大节省安装、维修工作量。

8、喷枪可采用气缸推进系统，方便喷枪自动推进，延长喷枪使用寿命。

氨水脱硝喷枪主要用途：

1、 脱硝：氨水、尿素等还原剂的喷洒。

2、 冷却：锅炉尾气、铸件等的冷却。

3、 调湿：混凝土、废气加湿。

4、 焚烧：废水、废液的焚烧

The characteristics of ammonia denitration gun:

1, produce the average particle size is 70 microns 'micro fog' two fluid fan nozzle.

2, flow adjustment range is larger, and spray Angle changes small.

3 shape, spray particle size uniform in all area.

4, equal distribution of flow, suitable for most of the nozzle arrangement is used, jet distance, strong penetrating power.

5, foreign body through the diameter is big, not easy to block.

6, simple structure, easy to maintain

7, portable design, easy installation and removal of more quick, save installation, maintenance workload.

8, spray gun cylinder propulsion system can be used for automatic spray gun propulsion, prolong the service life of spray gun.

Ammonia denitration gun main use:

1, denitration: ammonia, urea, such as reducing agent spraying.

2, cooling, boiler exhaust gas, such as casting cooling.

3, wet: concrete, waste gas humidification.

4, burning: waste water, waste burning

Material: 303, 316, 310 stainless steel, alloy

The spray shape: fan product introduction

Ammonia denitration gun ordering information:

Feizhuo - F - SS

斐卓新型脱硝喷枪是我公司研发人员在充分吸收传统脱硝喷枪优点的基础上，进行内部结构改造而研制成功的一种新型脱硝喷枪，对于脱硝工况来说，脱硝喷嘴、喷枪良好的性能是保证脱硝效率高及运行费用、氨逃逸、热损耗低的关键。其主要特点如下：

（1）使用寿命长：斐卓新型耐磨脱硝喷枪采用了高强度的耐磨合金材料制作，不仅耐热温度高达1360℃，而且是普通脱硝喷枪使用寿命的2到3倍。

（2）设计更科学：普通脱硝喷枪气、液一般是在喷嘴处混合形成雾化，喷嘴一旦被磨坏，液体就不再雾化会以水柱形式喷出，不但失去脱硝率，而且液体碰到锅炉内壁，还会导致锅炉浇注料损毁。斐卓新型耐磨脱硝喷枪采用了枪体尾部混合雾化技术，即便喷嘴损坏，喷出的液体仍然能保持良好的雾化效果，不但对锅炉不会造成任何损害，且依然能保持良好的脱硝效果。

（3）不需要冷却风：脱硝喷枪一般采用气助式双流体喷枪，普通脱硝喷枪需要借助冷却风对枪体冷却保护，而空气压缩机耗电非常高，俗称电老虎。斐卓新型耐磨脱硝喷枪不需要冷却风保护，节省了电能，为企业节约了成本。

（4）喷嘴可更换：普通脱硝喷枪的喷嘴和喷枪是整体的，喷嘴需要更换时，必须连同枪体一起更换，造成不必要的浪费。斐卓F 新eizhuo耐磨脱硝喷枪喷嘴与枪体采用螺纹连接，喷嘴需要更换时，不需要连同枪体一起更换，为企业节省了运行费用。

（5）喷枪装、卸快捷：喷枪采用快装连接，现场操作、维护简单方便。

（6）费用低效率高：斐卓新型耐磨脱硝喷枪，采用科学的内部结构优化与航天特有的精密机械加工技术，使得喷枪雾化效果更好，雾滴直径为50～70微米，溶液与烟气中的氮氧化物接触更加均匀，反应更加充分，脱硝效率更高，运行费用更低。

（7）覆盖范围广：斐卓Feizhuo新型耐磨脱硝喷枪，其雾化角度从30-110度，流量从5L/h到400L/h，可满足各种工况环境的需要。

斐卓Feizhuogs 研发出的新型耐磨脱硝喷枪，使用寿命更长、脱硝效率更高、运行费用更低、现场操作维护更加方便，对脱硝现状又进一步得到提升，脱硝效率高，是现代化脱硝的不二之选。

Fei zhuo new denitration spray gun is my company research and development personnel in fully absorb the advantages of traditional denitration spray gun, based on the internal structure of renovation and successfully developed a new type of denitration spray gun, for working condition of denitration, denitration nozzle, the performance of the spray gun is to guarantee high denitration efficiency and operation cost, low ammonia escape, heat loss of the key.Its main characteristics are as follows:

The Feizhuo special research and development of high efficiency and energy saving cement denitration spray gun, is specially needle furnace condition and research and development, completely solved the two problems, to improve the cement SNCR denitration efficiency under the premise of greatly saves the use amount of ammonia or urea, for manufacturers to reach the goal of high efficiency and energy saving, is a cement plant denitration industry upgrading products.The product has been put into many manufacturers use, its performance and using effect is far superior to the traditional common spray gun, and will give your company bring considerable social benefit and economic benefit.

FM空气喷枪（图四）提供了主要的雾化方法。通过位于涂料喷嘴和风帽之间的空