雾化喷嘴的水雾覆盖面积大。气液雾化喷嘴的雾化直径能够达到3um-4um,能够充分的与烟气进行混合,双流体雾化喷嘴,有利于烟气降温调量,不同比例的调节水气变化量,雾化颗粒基本保持不变。
空气雾化喷油嘴与机械喷油嘴的工作原理不相同,它是利用压缩空气的喷散作用来使嫩料雾化的。因此,它可以避免那些机械喷嘴所固有的低油压时雾化不良和油址调节受供油压力限制的缺点。在这种喷油嘴中,大部分压编空气经空气流道1以约300 m/,的速度夹带翁由旋流室供来的坦料喷向姑烧空间,而另一部分空气则进人喷油嘴旋流室后的内腔.与嫩料混合后由喷口射出。这种内外两层空气的夹流方案可以保证嫩料良好地雾化。
斐卓Feizhuo_广角实心喷嘴系列G-W/H-WSQ系列
G-W和H-WSQ系列喷嘴的特点是能产生实心锥形的喷雾形状,喷射覆盖区域呈圆形(方形),喷流角度为120°-125°(93°-115°)。
此类实心喷嘴在整个喷流区域内喷出均匀喷雾,液滴大小中等至偏大。在需要彻底覆盖一些区域的喷流应用领域能产生极佳的效果;
这种喷雾的均匀来源于独特的叶片设计和精准的内部尺寸,保证勒准确,稳定的产品性能。
G - W and H - series nozzle is the feature of WSQ can produce solid conical spray shape and regional jet assumes the circular (square), the jet Angle is 120 ° to 125 °, 93 °, 115 °).
Such solid in the whole flow area nozzle spray equably, droplet size medium to large.In some need a thorough coverage area of the spray flow field can produce great effect;
This kind of spray evenly from the unique blade design and precise internal size, ensure accurate, stable product performance.
带开关控制的空气雾化喷嘴JJAU设计特点
1/8jjau系列喷嘴与1/4JAU系列喷嘴功能是一致的,只是结构上紧凑精巧,适合空间狭小的场合使用。
1/8JJAU系列喷嘴的大的特点是一个内部气体驱动腔,能够控制喷雾的开和关,每分钟最快运行180次。
在喷嘴本体上有一个雾化空气入口AIR和液体入口LIQUID,螺纹接口为1/8,另外针阀驱动腔空气入口为CYL。
喷嘴本体可以与专用的迷你型喷雾装置配合使用。
雾化喷嘴一般应用:
磨具自动润滑;
喷雾加湿;
自动喷涂脱膜剂;
自动喷洒;
自动喷码打标;
定时定量喷洒化学剂;
With a switch control air atomizing nozzle JJAU design characteristics
1/8 jjau series nozzle and 1/4 jau series nozzle function is the same, just the structure compact, suitable for occasions in the narrow space.
The biggest characteristic of 1/8 jjau series nozzle is an internal gas driven cavity, can control the spray and off, run the fastest 180 beats per minute.
On the nozzle body has a atomization AIR inlet AIR and LIQUID inlet LIQUID, screw thread interface at 1/8, while needle valve driven cavity AIR inlet for cyl.ul.
Nozzle body can be used with dedicated miniature spray.
Spray nozzle general applications:
Abrasive tool automatic lubrication;
Spray humidification;
Automatic spraying remover;
Automatic spraying;
Automatically printing marking;
Timing quantitative spraying chemical agent;