雾化喷头

1/5
雾化喷头图1

雾化喷头

¥0.00/件
2017-09-14 19:3680询价
参数
  • Feizhuo品牌
  • 1件起订
  • 松江产地
上海 松江 0天内发货 0件
产品参数
上海斐卓喷雾系统有限公司普通会员
所在地:上海 松江
进店逛逛 在线询价
产品详情

空气雾化喷嘴通过外部混合装置改变气体压力而不改变液体流率来控制雾化,对于扇形喷雾,尺寸”A“流型宽度,如图所示。喷嘴从喷嘴投射到很大弥散点的总距离为“D”。

雾化喷嘴可以随时的调整气压和水压,比例可随时调整,1:15.

喷雾角度为扇形和实心。角度60°。

接口螺纹大小为3/4.

Air atomizing nozzle changing gas pressure by external mixing device without changing the liquid flow rate to control the atomization, the fan-shaped spray, dimension 'A' type flow width, as shown.Nozzle of projects from the nozzle to the maximum dispersion point total distance for the 'D'.

Atomizing nozzle can adjust the air pressure and water pressure, ratio can be adjusted at any time, 1:15.

The spray Angle for the fan and solid.Angle 60 °.

Interface thread size for three quarters.


液压式多头雾化喷嘴

大容量固定槽罐清洗喷嘴中的13FULLJET喷嘴可产生多种喷射形状和覆盖面积;

简易、可靠、不移动部件;

可选材料:黄铜、低碳钢、不锈钢;

压力范围:1.5到3.5bar。

极高工作温度是360度。

系列广泛的喷射覆盖面;

可清洗直径为3.1米的槽罐;

使用1/4或3/8实心锥形喷嘴。

流量范围;35到230L/MIN,

槽罐开口尺寸:152mm

材料;黄铜,303,316不锈钢;


斐卓Feizhuo虹吸雾化喷嘴设计特点:

虹吸雾化喷嘴能够调节液体流量,在不改变空气压力和液体压力的环境下,同样可以产生合乎要求的喷雾,因此具有很强的适应性。每一种喷雾装置均由空气帽和液体毛组成,能够提供扇形和圆形的喷雾模式,并有着广泛的流量范围。喷嘴体的入口接头有多种尺寸,适合大多数常用的管道。以上喷嘴部件可以互换,这为得到不同的喷雾性能提供了灵活机动性。

The Fijian zhuo Feizhuo siphon atomization nozzle design features:

Siphon is a fluid mechanics phenomenon, can need not pump and pumping liquid absorption.Siphon atomization nozzle decreased by increasing the pressure of a gas or liquid pressure to get more fine droplet spray, which leads to higher turnover of gas liquid flow rate.Siphon the micro droplet spray atomization nozzle, can volatilize very good humidification effect on the surrounding environment, the nozzle is the requirement of humidity control places ideal choice.The internal structure of special design can make the liquid and gas mixing, produce fine spray droplet size.Usually, by increasing the gas pressure or lower liquid pressure can be more subtle (30 microns) of spray droplets, resulting in a higher gas flow rate and liquid flow rate.

Siphon atomizing nozzle can adjust liquid flow rate, without changing the air pressure and fluid pressure environment, also can produce accordance with the requirements of the spray, so has a strong adaptability.Each spray of air cap and liquid hair, provide the fan and circular spray pattern, and has a wide flow range.The entrance of the nozzle body joint has a variety of sizes, suitable for most commonly used pipe.Above the nozzle parts are interchangeable, the performance for different spray flexible mobility.


在线留言

*详情

公司

*姓名

*电话

邮箱

QQ

微信

旺旺

相关公司
相关行业
产品热门搜索
店铺最新
按关键词字母分类:
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 0-9
雾化喷头
¥0.00
  • 采购产品
  • 采购数量
  • 联系电话
获取报价
在线问
最近来访记录
 
采购 登陆