斐卓Feizhuo气动式伸缩喷枪性能特点
1、 雾化均匀——喷雾全区域的粒径分布均匀,为液体的均匀蒸发和吸收反应提供了非常优越的保证。平均颗粒直径只有60μm,粒径120μm。
2、 运行成本更低——低气水比是此款喷枪的优点,长时间使用更能节省运行成本。
3、 气动伸缩装置——喷枪采用气动伸缩装置,喷枪不运行时可以自动退出炉内,易于喷枪的维护,大大延长了喷枪的使用寿命。
4、 流量范围广——流量范围从3L/h—400L/h,可以满足各种流量需求。
5、 使用寿命长——因喷嘴是在低压环境下工作,水压气压都不超过0.6Mpa,所以对喷嘴磨损很小,而喷枪亦可带保护套管,喷嘴置于保护套管内,能够更好保护喷嘴,从而大大延长使用寿命。
角度:20°
流量:0.05-6.67L/min
材质:304、310不锈钢,哈氏合金
喷雾形状:空心锥形、实心锥形、扇形产品介绍
The Fijian zhuo Feizhuo pneumatic telescopic spraying performance characteristics1, uniform atomization, spray the whole area of uniform particle size distribution, provides the uniform liquid evaporation and absorption reaction is very superior.The average particle diameter of only 60 mu m, maximum particle size of 120 microns.
2, lower operation cost, low gas water ratio is the advantage of this spray gun, use for a long time can save running cost more.
3, pneumatic telescopic device, pneumatic telescopic device for the gun, spray gun not runtime can automatically come back inside, easy to spray gun maintenance, greatly extend the service life of the gun.
4, wide flow range - flow range from 3 l/h, 400 l/h, can satisfy all kinds of traffic demand.
5, long service life, because of the nozzle is working under low pressure environment, hydrostatic pressure no more than 0.6 Mpa, so wear of nozzle is small, and the spray gun can protect casing, nozzle inserted in case, can better protect the nozzle, thus greatly extend the service life.
适用范围: SNCR或SCR脱硝雾化系统
喷射溶液: 氨水、尿素溶液或液氨
用特种钢材——具有耐高温(耐热温度1250℃)、耐磨损、耐酸碱等特性,经特殊金属处理工艺加工而成,确保喷枪品质。
自动伸缩设计——喷枪配有自动伸缩机构,系统停用时喷枪会根据设置要求自动缩回,避免高温烟气对喷枪的灼烧,可现场、远程控制,运行稳定可靠。
降温设计独特——为避免喷枪长期在850℃~1050℃的高温环境下工作,固定式喷枪设计了独特的降温保护功能,大大延长了喷枪的使用寿命。
雾化效果良好——雾化角度30°~90°,雾滴颗粒在30~70μm,雾场喷射距离从800mm~7500mm,雾场在烟气中穿透能力强、与烟气混合均匀,反应剂与烟气中的氮氧化物反应更加充分,确保脱硝。
多种型号选择——喷枪根据型号分为SE、FE、FT、FM、FV五个系列,根据雾场角度分为30°、55°、75°、90°和120°五种型号。单只喷枪喷射量在2~650 L/h,可根据现场工况变化任意调节,能够满足各种脱硝工况环境需求。
Shanghai Feii zhuo denitration gun scope of spray system co., LTD
Scope of application: SNCR and SCR denitration atomization system
The injection solution: ammonia, urea solution or liquid ammonia
With special steel, high temperature (1250 ℃) heat temperature resistance, wear resistance, acid and alkali resistance and other properties, processed by special metal processing technology, ensure the quality of spray gun.
Automatic telescopic - gun equipped with an automatic telescopic mechanism design, the system outage spray gun will retract automatically according to set requirements, avoid high temperature flue gas burning of spray gun, on-site, remote control, stable and reliable running.
Cool and unique design, in order to avoid spray gun for a long time at 850 ℃ ~ 1050 ℃ high temperature conditions, fixed gun design a unique cooling protection function, greatly extend the service life of the gun.
Atomization effect is good, atomizing Angle of 30 ° ~ 90 °, droplets particles in 30 ~ 70 microns, the fog spray distance from 800 mm to 7500 mm, fog field in the flue gas penetration ability, and flue gas mixing, reaction agent react with nitrogen oxide in flue gas to more fully, to ensure efficient denitration.
A variety of models to choose - gun according to the model is divided into SE, FE, FT, FM, FV five series, according to the fog field Angle is divided into 55 °, 30 °, 75 °, 90 ° and 120 ° five models.Single gun injection quantity in 2 ~ 650 L/h, can be adjusted according to site condition change, to meet the demand of working condition of all kinds of denitration environment.
Disable prevent function - gun held in design to disable function, t