空气雾化喷嘴压力传送式喷雾装置（外混式）

雾化喷嘴有点和特性：

通过外部混合装置，无需改变液体流量，只需改变空气压力，即可对雾化进行控制。

对于扇形喷雾，尺寸A，B,和C是距离喷嘴相应距离处的喷雾角度；

Through the external mixing device, without changing the liquid flow, only need to change the air pressure, can to control the atomization.

For the fan-shaped spray, size A, B, and C corresponding distance is the distance the nozzle spray Angle;

The spray from the nozzle to the maximum dispersion point projection a total distance of D;

When using pressure conveying liquid system, liquid by pressure was taken to the nozzle;

Liquid and compressed air or other gas is mixed in the outside, to produce fully atomized spray;

上海斐卓喷雾系统公司压力雾化喷嘴FN设计特点

压力雾化喷嘴FN采用单元组合式连接方式，加装过滤网，便于清洗。

为了更好的雾化，建议压力雾化喷嘴FN的入口压力在5 巴以上。

一般应用

●纺织厂加湿

●空调房加湿

●烟囱内烟气冷却

●喷雾干燥

●垃圾站除臭

●喷洒化工原料

●消毒灭菌

压力雾化喷嘴FN系列产品更多的参数请联系斐卓Feizhuo喷雾系统公司！或者登陆斐卓网站进行查看咨询！

空气雾化喷嘴通过外部混合装置改变气体压力而不改变液体流率来控制雾化，对于扇形喷雾，尺寸”A“流型宽度,如图所示。喷嘴从喷嘴投射到很大弥散点的总距离为“D”。

雾化喷嘴可以随时的调整气压和水压，比例可随时调整，1：15.

喷雾角度为扇形和实心。角度60°。

接口螺纹大小为3/4.

Air atomizing nozzle changing gas pressure by external mixing device without changing the liquid flow rate to control the atomization, the fan-shaped spray, dimension 'A' type flow width, as shown.Nozzle of projects from the nozzle to the maximum dispersion point total distance for the 'D'.

Atomizing nozzle can adjust the air pressure and water pressure, ratio can be adjusted at any time, 1:15.

The spray Angle for the fan and solid.Angle 60 °.

Interface thread size for three quarters.