起订:1立方
TCP0030A is a high-performance, easy-to-use AC/DC current probe designed for use and direct connection to oscilloscopes with the TekVPI™ probe interface. This AC/DC current measurement probe provides greater than 120 MHz of bandwidth with selectable 5 A and 30 A measurement ranges. It also provides exceptional low-current measurement capability and accuracy to current levels as low as 1 mA, important for meeting today's challenging current measurement needs.
KEY FEATURES
- Easy-to-use and accurate AC/DC current measurements
- Intelligent communication with TekVPI™ oscilloscopes provides:
- Units scaling and readout. Automatic, on-screen readout of amps and magnitude. Manual setup is not required. Hand calculation from volts to amps is unnecessary
- Push button degauss and Autozero functionality
- Probe status and diagnostic indicator LEDs
- Remote GPIB/USB probe control
- Split-core construction allows easy circuit connection
- High accuracy with typically less than 1% DC gain error
- Low noise and DC drift
- 3rd party safety certification
KEY PERFORMANCE SPECIFICATIONS
- DC to >120 MHz bandwidth
- 30 A RMS maximum current capability
- 50 A peak pulse current capability
- High accuracy with typically less than 1% DC gain error
- Accurately measures current levels as low as 1 mA
ELECTRICAL CHARACTERISTICS
Bandwidth
DC to ≥120 MHz
Rise time
≤2.92 ns
Maximum DC current
30 A
Maximum RMS current
30 A
Maximum peak pulse current
50 A
Maximum bare wire voltage
150 V CAT II, (insulated wire 300 V CAT II)
Sensitivity
1 mA (on oscilloscopes that support 1 mV/div setting)
DC accuracy
±1% typical
±3% warranted
Maximum Amp-Second product
500 A*µs (in 30 A range)
Insertion impedance
1 mΩ at 10 kHz
3.5 mΩ at 100 kHz
0.08 Ω at 1 MHz
0.15 mΩ at 10 MHz
0.7 Ω at 100 MHz
0.85 Ω at 120 MHz
Signal delay
14.5 ns
Current ranges
5 A and 30 A
Power requirements
TCP0030A is powered directly by oscilloscopes with the TekVPI™ interface.
