A622 100 AMP AC/DC CURRENT PROBE/BNC
This "long nose" style clamp-on probe uses a Hall Effect current sensor to provide a voltage output to oscilloscopes. It has a BNC connector and may be used with a shrouded banana plug adapter*1 so it can also be used on digital multimeters, TekMeter, and scopes. The A622 can measure AC/DC currents from 50 mA to 100 A peak over a frequency range of DC to 100 kHz. It provides 10 mV or 100 mV output for each Amp measured.
频率范围 |
DC ～100 kHz |
最大输入电流 |
100 A peak |
输出 |
10 mV/A, 100 mV/A |
最大导线半径 |
11.8 mm (0.46 in.) |
终端接口 |
BNC*1 |
耐压范围 |
600 V (CAT III) |
