This instrument is used for measuring the peak force of a spot welder. The top of the handle has
one switch that is used to turn the instrument on and to reset the display to zero. The three plugs on the
handle areremoved to access the shunt calibration switch, analog output and the adjustment potentiometer.
The standard full scale ranges of the sensor are 300, 1000, 3000, 5000 and 10,000 pound
capacity. An optional kilogram display is available if specified by the customer. The instrument features
an automatic shut-off (in Track Mode only) after approximately 75 seconds. There are 6 standard AA-size
batteries which power the unit and will provide approximately 50 hours of continuous use. A built-in low
battery indicator fades the right-most display digit.
